How do I release and renew my IP 2024?

Step 1: English Answer

IP Release and Renewal Guide

An IP address is a unique numerical label assigned to each device connected to a computer network that uses the Internet Protocol for communication. IP addresses are essential for devices to communicate with each other over a network.

There are two main types of IP addresses: static and dynamic. A static IP address remains the same for a specific device, while a dynamic IP address is assigned to a device for a limited period of time and can change over time.

In some cases, it may be necessary to release and renew your IP address. This can be done to troubleshoot network connectivity issues, or to simply obtain a new IP address.

To release and renew your IP address, follow these steps:


1. Open a command prompt. To do this, press the Windows key + R, then type cmd and press Enter.
2. In the command prompt window, type the following command and press Enter:

```
ipconfig /release
```

This command will release your current IP address.

3. Once your IP address has been released, type the following command and press Enter:

```
ipconfig /renew
```

This command will request a new IP address from your DHCP server.

4. Once your new IP address has been assigned, type the following command and press Enter:

```
ipconfig
```

This command will display your current IP address, subnet mask, and default gateway.

If you are still experiencing network connectivity issues after releasing and renewing your IP address, you may need to contact your ISP for further assistance.

Click Start->Run, type cmd and press Enter.Type ipconfig /release at the prompt window, press Enter, it will release the current IP configuration.Type ipconfig /renew at the prompt window, press Enter, wait for a while, the DHCP server will assign a new IP address for your computer.More items...