How do I cut a hole for a door knob 2024?

Ethan Walker | 2023-04-20 00:05:01 | page views:1604
I'll answer
Earn 20 gold coins for an accepted answer.20 Earn 20 gold coins for an accepted answer.
40more

Ian Rodriguez

Works at Twitter, Lives in San Francisco, CA
3 Bore the doorknob hole through the face of door using a 2 1/8-inch hole saw; drill halfway through from each side. 4 Use a 1-inch hole saw to bore latch hole in door edge. 6 Set latch into hole, and mark its outline on door edge. 7 Use hammer and chisel to cut a shallow mortise for the latch.
2023-04-26 00:05:01

Harper Lee

QuesHub.com delivers expert answers and knowledge to you.
3 Bore the doorknob hole through the face of door using a 2 1/8-inch hole saw; drill halfway through from each side. 4 Use a 1-inch hole saw to bore latch hole in door edge. 6 Set latch into hole, and mark its outline on door edge. 7 Use hammer and chisel to cut a shallow mortise for the latch.
ask:3,asku:1,askr:137,askz:21,askd:152,RedisW:0askR:3,askD:0 mz:hit,askU:0,askT:0askA:4